Wood finishing companies producing siding, decking and Glulam rely on CUTEK to deliver a better value to the market.
The general practice in Australia is to pre coat the wood in the mill or factory before sending the material to the job site. This way the wood is protected on an early stage, preventing any damage caused by exposure on the job site prior to being used.
With CUTEK the wood can be wet stacked. One coat by hand or machine and the planks of wood can be piled up without any stick. No lap marks, no dripping.
After installation the wood receives the second coat just on the exterior face of the wood.
If you want to use a machine to do a higher volume of pre coating we have an extensive experience and can put you in contact with the right vendors around the world.
INDUSTRIAL USE IN AUSTRALIA
These companies’ links provide many compelling examples and case studies for CUTEK in pre-construction (pre-coating) and after market applications.
1 / OUTDOOR FURNITURE / STRUCTURES
2 / FINISHED WOOD PRODUCTS
Woodform Architectural provides feature linings for sophisticated architectural projects with a seamless combination of modular concealed fixing and a wide range of linear textures.
They pre coat with CUTEK.
Check their inspiration gallery.
3 / GLULAM / ENGINEERED TIMBER
Timber Engineered Structures (T-E-S) is a leading glulam distributor in Australia with hundreds of projects all over the world. 50 years of technical experience in Glulam development.
They pre-coat using CUTEK.
They endorse and offer CUTEK
Gallery of projects/ many mention use of CUTEK.
McIntosh Laminates is New Zealand’s leading glulam company since 1958. They produce the largest glulam beams in the world. They use mostly radiata pine. Macintosh supply glulam to Timber Enginered Structures.
They pre-coat with CUTEK.